4 Replies Latest reply on Feb 8, 2013 2:11 PM by david

    Need help / Boot command TA908

    rivera New Member

      I am trying to set a new configuration file as the one will be use by the TA908 in the next reload. The AOS version I the device has is:

       

      TA908#sh ver
      ADTRAN, Inc. OS version A4.11.00.E
        Mainline Version: M04
        Checksum: 829316F6
        Built on: Mon Jan 23 17:04:51 2012
        Upgrade key: 95d1b576aed415646b73dd5addded339
      Hardware version DSP7119-2ndGen
      Boot ROM version 14.04.00
        Checksum: 8549
        Built on: Wed Apr 11 15:24:20 2007
      Copyright (c) 1999-2007, ADTRAN, Inc.
      Platform: Total Access 908 (2nd Gen), part number 4212908L1

       

      Here is the command output when try to configured:

       

      TA908#boot ?
      system                - System image file
      voip                  - VoIP image file

      TA908#boot

       

      According to the manual I should have the option of boot config as is in the manual:


         

       

      boot config command to modify system boot parameters by specifying the location and name of no form of this command to use the default startup


      Thanks for your help in advance.

        • Re: Need help / Boot command TA908
          david Employee

          Rivera,

           

          Thanks for posting!  The "boot config" option is not available in A4.11.00 firmware.  However, that command is available in the new R10.x firmware available for download at http://www.adtran.com .

           

          In A4.11.00, the unit will always boot up and use the configuration file labeled "startup-config" from within flash memory.  If you have already uploaded the file you wish to be the new startup-config for the unit, you can use the copy command to overwrite your current startup-config file.  Below is the template for how this is entered.

           

          copy <filename> startup-config

           

          This will overwrite any startup-config file already on the unit.  If you have any other questions, feel free to add them to this post.

           

          Thanks!

          David

          • Re: Need help / Boot command TA908
            rivera New Member

            Thanks David, which of the 5 version of the firmware should I use ?

            • Re: Need help / Boot command TA908
              david Employee

              Rivera,

               

              I went ahead and flagged this post as "Assumed Answered".  If any of the responses on this thread assisted you, please mark them as Correct or Helpful as the case may be with the applicable buttons.  This will make them visible and help other members of the community find solutions more easily.  If you still need assistance, I would be more than happy to continue working with you on this - just let me know in a reply.

               

              Thanks!

              David