3 Replies Latest reply on Mar 27, 2013 12:36 PM by racolvin

    PRI DS0 Mapping Based on Number

    qnet New Member

      I have a network PRI and user PRI. Is it possible to route inbound calls from the network to a specific user PRI channel based on phone number?

       

      Example, assume I had 555-8001 through 555-8023. Can I tell the Atlas 550 to always give calls to 555-8001 to channel 1 on the user

      PRI, 555-8002 to channel 2, etc.

        • Re: PRI DS0 Mapping Based on Number
          patrick Employee

          Thank you for using the ADTRAN Support Forums, and for your question.

           

          I'm afraid a specific number (or range of numbers) cannot be directed to a specific PRI channel in the ATLAS. The ATLAS does not allow a PRI to be broken up into "trunk groups," but treats the PRI as a single interface, and all the channels on the PRI are in a single hunt-group.

           

          Hope this answers your question,

          Patrick

          1 of 1 people found this helpful