2 Replies Latest reply on Apr 30, 2013 12:18 PM by david

    Configuring transfert call using NetVanta 644

    alainpilote New Member

      Hi,

       

      I would be pleased to know if some one can show us how to configure a Netvanta 644 to make a tansfert call.

      thanks

        • Re: Configuring transfert call using NetVanta 644
          david Employee

          Alainpilote,

           

          Thanks for posting!  Is this unit doing Channel Associated Signalling (CAS) or a PRI?  We do not support a hook-flash method of transfer for a CAS T-1, so this would require a new call on a separate channel.  For the PRI, we do have a Two B-Channel Transfer feature which is described in Two B-Channel Transfer: Quick Configuration Guide.  A sample configuration is shown below.

           

          (config)#interface pri 1

          (config-pri 1)#isdn supplementary-service tbct

          (config-pri 1)#isdn supplementary-service tbct notify-controller

           

          Thanks!

          David

          • Re: Configuring transfert call using NetVanta 644
            david Employee

            Alainpilote,

             

            I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and post additional details.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

             

            Thanks!

            David