3 Replies Latest reply on May 17, 2013 12:24 PM by adtran_dealer

    How to Configure DHCP Options Using HEX

    adtran_dealer New Member


      I am trying to configure a DHCP scope option (Option 184" which contains multiple HEX entries.

       

      I need to enter the following HEX string and need to know the proper syntax:  0x1;0x4;0xc0;0xa8;0x5;0xa

        • Re: How to Configure DHCP Options Using HEX
          david Employee

          Adtran_Dealer,

           

          Thanks for posting!  This may be an issue we need to work over the phone through our regular Technical Support queue.  You can reach us by calling 888-423-8726.  However, since there are multiple hex entries for that option, I would try adding the option as follows.

           

          ip dhcp pool <Pool Name>"

            option 184 ascii "0x1;0x4;0xc0;0xa8;0x5;0xa"

           

          Of course, insert your DHCP pool name above.  Please let me know if this works properly or we need to seek additional options.  Please include the device to which this DHCP offer is being sent in any response post.

           

          Thanks!

          David

          • Re: How to Configure DHCP Options Using HEX
            david Employee

            Adtran_dealer,

             

            I just wanted to check back in with you on this DHCP option.  Were you able to get it working properly using the example command above?

             

            Thanks!

            David