2 Replies Latest reply on Sep 4, 2013 10:27 AM by geo

    PRI D Channel

    rlg192320 New Member

      Hi,

       

      I was wondering if anyone could tell me how to choose a specific D channel rather than using channel 24. I have a customer that wants the D channel to reside on channel 1 instead of 24. Has anyone else ever ran into this?

       

      Thanks,

       

      Robert G

        • Re: PRI D Channel
          geo Employee

          Hello Robert,

           

          The D-channel has to be set for channel 24 on the Total Access 900(e) units. You can setup a full T1 or a fractional T1, but the D-channel must be channel 24.  Unfortunately there is no way around this.  This document covers the PRI configuration in AOS:

           

          https://supportforums.adtran.com/docs/DOC-1856


          Page 3 has a note that states that channel 24 is dedicated for PRI signaling.  Let me know if you have any questions.

           

           

          Regards,

          Geoff

            • Re: PRI D Channel
              geo Employee

              Hello Robert,

               

              I went ahead and flagged this post as "Correct."  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

               

              Thanks,

              Geoff