3 Replies Latest reply on Sep 10, 2013 10:04 AM by touristsis

    Adtran Netvanta 4305 with 8 - (OCTEL) T1 card and two ethernet port, only 1 default static route

    touristsis Visitor


      Hi,

      I have an Adtran Netvanta 4305 with an 8 octel T1 card and two Ethernet port.  I have two adtran router behind it.

      2 - T1 is active.  When the main default route t1 goes down, everything is down.  |
      How can I configure the 4305 to route everything on eth 0/1 to go out the frame relay 1.500 or 1st T1.

      How can I configure the 4305 to route everything on eth 0/2 to go out the frame relay 2.500 or 2nd T1.

       

      ip route 0.0.0.0 0.0.0.0 fr 2.500

      ip route 55.55.55.55 255.255.255.252 fr 2.500

      ip route 66.66.66.66 255.255.255.252 fr 1.500

       

      Here is the route in place.  As you can see everything else is going out fr 2.500 or fr 1.500

       

      T1 -----frame relay 1.500-----55.55.55.55 (ip address) --- eth 0/1 ----54.54.54.54 (ip address) ---------- usable ip on router 55.54.54.54

      T1 (2) - frame relay 2.500 ------- 66.66.66.66 ----------------eth 0/2 -------- 64.64.64.64 (ip address)--------usable ip on router 66.64.64.64

       

      here is just an example..