2 Replies Latest reply on Sep 5, 2013 11:24 AM by chipper9

    Config for NetVanta 3448

    chipper9 New Member

      Hello all,

      I'm not at all familiar with this router and need some help.

      I simply need to set the router up to route between to networks.

      WAN side (int eth0/1) with IP x.x.x.x 255.255.255.252

      LAN network of x.x.x.x 255.255.255.248, statically assigned (no DHCP).

      I would prefer to use any of the switch ports (1-8) for my static LAN devices.

      Also would prefer to use NAT.

      Can anyone help me out with the proper CLI prompts?

      Thanks in advance,

        • Re: Config for NetVanta 3448
          levi Employee

          chipper9:

           

          Thank you for asking this question in the support community.  There are several ways you can configure the AOS device to meet the requirements you have stated.  Here is a sample configuration that you can paste into the CLI at the "(config)#" prompt:

           

          interface eth 0/1

            description Public Internet Connection

            ip address 1.1.1.1 255.255.255.252

            ip access-policy Public

            no shutdown

            no lldp send-and-receive

          !

          interface vlan 1

            description LAN

            ip address  10.1.1.1  255.255.255.0

            ip access-policy Private

            no shutdown

          !

          ip route 0.0.0.0 0.0.0.0 <default-gateway to ISP address>

          !

          ip access-list standard wizard-ics

            remark Internet NAT

            permit any

          !

          ip policy-class Public

          !

          ip policy-class Private

            allow list self self

            nat source list wizard-ics interface eth 0/1 overload

           

          Also, the Accessing the Web Interface (GUI) in AOS or the Video may be beneficial for your implementation.  From the GUI you can follow the Configuring Internet Access (Many to one NAT) with the Firewall Wizard in AOS video to assist you with setting up Internet access and NAT using the built in wizard.

           

          I hope that makes sense, but please do not hesitate to reply to this post with any additional questions or information.  I will be happy to help in any way I can.

           

          Levi