2 Replies Latest reply on Oct 7, 2013 5:57 AM by nick

    1800v2 and 1840 Bandwidth

    dalicea New Member

      Hello,

       

      What are some of the network specs for the 1800v2 and 1840 BSAPs? I am looking to see how much bandwidth they can support. In our campus setups, we have a total of 31 allowed connections before load balancing (I believe recommended a while back), with some access points connected to fastethernet ports and others connected to gigabitethernet ports. We give students 3072 Kbits/sec in a students role we have, but is that for the entire role, or each student (Bandwidth Shaping > QoS Rate in: 2.3.0.09?

      1840

      A location is planning on going mostly wireless in a room that can support 140 students, but only has 3 access points....so we are in the middle of brainstorming.

        • Re: 1800v2 and 1840 Bandwidth
          nick Employee

          dalicea

           

          The data sheet for these two APs can be found here.  With a distributed data-plane architecture, vWLAN limits per-user bandwidth at the AP.  For more on per-user bandwidth and the benefits associated with per-user bandwidth, please refer to page 16 of the Administrator's Guide vWLAN Version 2.2.1 and Later.

            • Re: 1800v2 and 1840 Bandwidth
              nick Employee

              I went ahead and flagged this post as "Assumed Answered". If any of the responses on this thread assisted you, please mark them as Correct or Helpful as the case may be with the applicable buttons. This will make them visible and help other members of the community find solutions more easily. If you have any additional information on this that others may benefit from, please come back to this post to provide an update. If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

               

              Thanks,

               

              Nick