2 Replies Latest reply on Oct 21, 2013 10:07 AM by bchesler

    How to Monitor IPSec tunnels via SNMP

    redbarron New Member


      How can I monitor IPsec VPN tunnels via SNMP.  My SNMP walks don't seem to yield any OID's for this on any Netvanta.  Anyone have this working?

        • Re: How to Monitor IPSec tunnels via SNMP
          Employee

          redbarron - Thanks for posting your question on the forum! Unfortunately, at the time of this post, there are no AOS MIBs available that monitor VPN tunnels. You may have some luck finding a non-AOS MIB that is able to monitor the tunnels.

           

          Please do not hesitate to let us know if you have any further questions.

           

          Thanks,

          Noor

          • Re: How to Monitor IPSec tunnels via SNMP
            bchesler New Member

            @ redbarron

             

            We just started looking into this as well.  At this point, we have come up with the concept to monitor the keep-alive probes.  That was the closest we could get to monitor the IPSEC Tunnels.  Here are the values for the probes:

             

            adGenAOSnmStatusName OBJECT-TYPE

            SYNTAX     OCTET STRING (SIZE(1..40))

                     MAX-ACCESS   read-only

            STATUS   current

            DESCRIPTION

            "The name of the corresponding probe entry. The probe identified by

                        a particular value of this index is the same probe as identified

                        by the same value as a adGenAOSnmName object instance."

                     ::= { adGenAOSnmProbeStatusEntry 1 }

             

            adGenAOSnmTestStatus OBJECT-TYPE

                    SYNTAX  INTEGER

                            {

            fail (1),

            pass (2)

                            }

                     MAX-ACCESS read-only

            STATUS  current

            DESCRIPTION

            "Current test state of the probe."

                     ::= { adGenAOSnmProbeStatusEntry 2 }

             

            adGenAOSnmTestsRun OBJECT-TYPE

                    SYNTAX   Counter32

                    MAX-ACCESS read-only

                    STATUS  current

                    DESCRIPTION

            "Number of test run on the probe."

                     ::= { adGenAOSnmProbeStatusEntry 3 }

             

            adGenAOSnmTestsFailed OBJECT-TYPE

                    SYNTAX   Counter32

                    MAX-ACCESS read-only

                    STATUS current

                    DESCRIPTION

            "Number of test that failed."

                     ::= { adGenAOSnmProbeStatusEntry 4 }

             

            adGenAOSnmStatsToleranceTestSize OBJECT-TYPE

                    SYNTAX  Counter32

                    MAX-ACCESS read-only

                    STATUS  current

                    DESCRIPTION

            "Specifies the test size."

                     ::= { adGenAOSnmProbeStatusEntry 5 }

             

            adGenAOSnmStatsToleranceTestValue OBJECT-TYPE

                    SYNTAX  Counter32

                    MAX-ACCESS read-only

                    STATUS  current

                    DESCRIPTION

            "Specifies number of tests that passed or failed.

                        Check 'adGenAOSnmTestStatus' for test state."

                     ::= { adGenAOSnmProbeStatusEntry 6 }

             

            adGenAOSnmTimeSinceLastStatusChange OBJECT-TYPE

                    SYNTAX   TimeTicks

                    MAX-ACCESS read-only

                    STATUS  current

                    DESCRIPTION

            "Time since last status change."

                     ::= { adGenAOSnmProbeStatusEntry 7 }

            1 of 1 people found this helpful