5 Replies Latest reply on Jan 8, 2014 9:57 AM by noor

    LLDP Error: Adtran 3100 vs Cisco 1602i

    fiberopticcoffee New Member

      I am receiving the following LLDP error on my Adtran NetVanta 3120 and 3130 boxes:

       

       

      -2013.10.26 13:15:47 LLDP LLDP:  Speed Duplex
      mis-match on swx 0/2. Speed/Duplex:
      "100M/full-duplex"   Neighbor Speed/Duplex: "1G/full-duplex"”

       

      The neighbor device on port 2 is a Cisco 1602i wireless access point with CDP turned on.

       

      Am I correct in assuming this is the same non-issue as https://supportforums.adtran.com/thread/3539 ?

        • Re: LLDP Error: Adtran 3100 vs Cisco 1602i
          jayh Hall_of_Fame

          In all likelihood.  If the "show interface" counters show expected negotiated speeds and don't show incrementing errors then it's the same cosmetic bug.  Probably wouldn't hurt to open a case on it, this bug hasn't been fixed for far too long.

          1 of 1 people found this helpful
          • Re: LLDP Error: Adtran 3100 vs Cisco 1602i
            levi Employee

            fiberopticcoffee:

             

            Thank you for posting this in the support community.  Do you know if the Cisco is configured with LLDP or LLDP-MED?  The error is related to what/how the end device is advertising its speed via LLDP.  If you would like to reply with the output from the debug lldp verbose command, I will be happy to review it for you.

             

            Levi

              • Re: LLDP Error: Adtran 3100 vs Cisco 1602i
                fiberopticcoffee New Member

                The Cisco 1602i AP is just vanilla LLDP.

                This error isn't service-affecting, but throws my provider's NOC techs for a loop every time they see the error.

                Should be able to get the debugs off this box this week.

                  • Re: LLDP Error: Adtran 3100 vs Cisco 1602i
                    levi Employee

                    fiberopticcoffee:

                     

                    I will be more than happy to review the debug for you, but most likely, as in almost all other cases, the error is related to what/how the end device is advertising its speed via LLDP.  You can disable LLDP on the ADTRAN by going to the port connected to the end device and issuing the no lldp send-and-receive command.

                     

                    Levi

                      • Re: LLDP Error: Adtran 3100 vs Cisco 1602i
                        Employee

                        fiberopticcoffee -

                        I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post to unmark it and select another in its place with the applicable buttons.  If you have any additional information on this that others may benefit from, please come back to this post to provide an update.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

                         

                        Thanks,

                        Noor