cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
eric_d
New Contributor

Adit 600>924e configuration importing

Jump to solution

hi.  New here and am under the gun a bit.  We're moving sites and have 2 old Adit 600 devices handling point to point T1's

Was wondering if there's an easy way to export the Adit 600 config and import into the TA 924e?

Thanks in advance

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Adit 600>924e configuration importing

Jump to solution

Eric,

Unfortunately, I am not aware of any way to convert these configurations between the two different units.  Please let us know if you need assistance configuring the Total Access unit.  With a basic description of the scenario, I can likely find some documentation or an example configuration you can use.

Thanks!

David

View solution in original post

0 Kudos
1 Reply
Anonymous
Not applicable

Re: Adit 600>924e configuration importing

Jump to solution

Eric,

Unfortunately, I am not aware of any way to convert these configurations between the two different units.  Please let us know if you need assistance configuring the Total Access unit.  With a basic description of the scenario, I can likely find some documentation or an example configuration you can use.

Thanks!

David

0 Kudos