2 Replies Latest reply on Jan 7, 2014 9:09 AM by noor

    NV160 VAP stats equivalent command string

    jrjdtv New Member

      On NV150 I am able to pull stats for each VAP that I have configured with command

      sh dot11 statistics interface dot11ap 1/1.1

        Last clearing of "show interface" counters: never

          Authentication Count: 17

          Deauthentication Count: 13

          Association Count: 17

          Disassociation Count: 1

          Reassociation Count: 0

          Wireless MSDU Rx Packets: 42682

          Wireless Data Rx Packets: 206979

          Wireless Multicast Rx Packets: 9635

          Wireless Management Rx Packets: 88658

          Wireless Control Rx Packets: 0

          Wireless MSDU Tx Packets: 1803505

          Wireless Data Tx Packets: 891632

          Wireless Multicast Tx Packets: 1729183

          Wireless Management Tx Packets: 31953

          Wireless Control Tx Packets: 0

       

      For NV160 this is the results that I get

       

      sh dot11 statistics interface dot11ap 2/1.1

      No available stats for this AP type.

        • Re: NV160 VAP stats equivalent command string
          levi Employee

          jrjdtv:

           

          Thank you for asking this question in the support community.  Unfortunately, at the time of this post, the NV16Xs do not support the statistics generated from the show dot11 statistics interface dot11ap <interface> command.  Therefore, the output generated from the command is "No available stats for this AP type."  The command is intended for the NV150s.

           

          I hope that makes sense, but please do not hesitate to reply to this post with any additional questions or information.  I will be happy to help in any way I can.

           

          Levi

            • Re: NV160 VAP stats equivalent command string
              Employee

              jrjdtv -

              I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post to unmark it and select another in its place with the applicable buttons.  If you have any additional information on this that others may benefit from, please come back to this post to provide an update.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

               

              Thanks,

              Noor