6 Replies Latest reply on Nov 12, 2013 1:27 PM by james_ucs

    IP706 and older Netvanta 7100

    yunotknowing New Member

      OK, I have a customer that has a Netvanta 7100 that was 2 years old with 12 IP706 phones.  Worked well until yesterday when we rebooted the device.  Then we could not get out of bootstrap.  Called Adtran and they told us there was a hardware issue and we had to send the unit in.

       

      Well because this is a good customer of mine I called our Account Manager at Adtran and found another Adtran customer that had an older unit on his shelf that I could use till we get our customers repaired or replaced.

       

      All went well until we tried to config the IP706 phones. Apparently, the older Netvanta doesnt have native support for the IP706.

       

      My question is, how can I get these phones to work with this version of the Netvanta 7100 until our customer can get the permanent box back?

       

      Here is the "sho ver" on the old Netvanta we are using to get us through this hurdle.

       

      ADTRAN, Inc. OS version 14.01.00.E

        Checksum: 9CA468B1, built on Wed Nov 29 14:30:55 2006

        Upgrade key: 44a8e2a810893cdc242441c8c4830208

      Boot ROM version 12.04.00

        Checksum: 2CE5, built on: Mon Jul 24 16:39:15 2006

      Copyright (c) 1999-2006, ADTRAN, Inc.

      Platform: NetVanta 7100, part number 1200796L1

        • Re: IP706 and older Netvanta 7100
          james_ucs Employee

          yunotknowing wrote:

           

          OK, I have a customer that has a Netvanta 7100 that was 2 years old with 12 IP706 phones.  Worked well until yesterday when we rebooted the device.  Then we could not get out of bootstrap.  Called Adtran and they told us there was a hardware issue and we had to send the unit in.

           

          Well because this is a good customer of mine I called our Account Manager at Adtran and found another Adtran customer that had an older unit on his shelf that I could use till we get our customers repaired or replaced.

           

          All went well until we tried to config the IP706 phones. Apparently, the older Netvanta doesnt have native support for the IP706.

           

          My question is, how can I get these phones to work with this version of the Netvanta 7100 until our customer can get the permanent box back?

           

          Here is the "sho ver" on the old Netvanta we are using to get us through this hurdle.

           

          ADTRAN, Inc. OS version 14.01.00.E

            Checksum: 9CA468B1, built on Wed Nov 29 14:30:55 2006

            Upgrade key: 44a8e2a810893cdc242441c8c4830208

          Boot ROM version 12.04.00

            Checksum: 2CE5, built on: Mon Jul 24 16:39:15 2006

          Copyright (c) 1999-2006, ADTRAN, Inc.

          Platform: NetVanta 7100, part number 1200796L1

           

          The first thing would be to upgrade this system to at least A2.04. L1 part numbers are restricted past that version, but that will at least get you to support for those phones.