2 Replies Latest reply on Jan 7, 2014 10:48 AM by noor

    ARP.REQUEST Packet not enqueued on vlan 1: Current Pkt Count Exceeded

    drjarmon New Member

      Viewing debug arp messages and keep getting ARP.REQUEST Packet not enqueued on vlan 1: Current Pkt Count Exceeded messages.  Is this a debug resource problem or a switch resource problem?

       

      Thanks

        • Re: ARP.REQUEST Packet not enqueued on vlan 1: Current Pkt Count Exceeded
          Employee

          drjarmon - That message means that the current interface (VLAN 1) has too many packets in the ARP queue to resolve. Usually this message is encountered when there are pingfloods or IP address sweeps occurring through the AOS device from the LAN. The message may also be seen if there are too many devices (large subnet) in the LAN.

           

          Please do not hesitate to let us know if you have any questions.

           

          Thanks,

          Noor

            • Re: ARP.REQUEST Packet not enqueued on vlan 1: Current Pkt Count Exceeded
              Employee

              drjarmon -

              I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post to unmark it and select another in its place with the applicable buttons.  If you have any additional information on this that others may benefit from, please come back to this post to provide an update.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

               

              Thanks,

              Noor