2 Replies Latest reply on Jan 2, 2014 11:16 AM by ftwrobert

    All EOC and/or all TMC Control Channels are Out-Of-Service.

    ftwrobert New Member

      We are receiving alarms from our Metaswitch stating "All EOC and/or all TMC Control Channels are Out-Of-Service."

       

      I believe this is an issue with the SCU cards on the 4303, but I'm not sure what action to take to correct the issue.

       

      When reviewing the Log's, I see the following:

       

      Bend-4303#2/System Status/Event Log                                            

           Time      Cat  Src  Slot  Port                            

      12/14 14:56:00 Min Syste  SCUB      Warm Start                 

      12/14 14:55:49 Min Syste  SCUA      Module Found               

      12/14 14:55:31 Cri RDT    Sl 1    1 Duplex TMC Failure Cleared 

      12/14 14:55:31 Cri RDT    Sl 1    1 Duplex EOC Failure Cleared 

      12/14 14:55:28 Min Syste  PS-B      Module Found               

      12/14 14:55:28 Min Syste  PS-A      Module Found               

      12/14 14:55:28 Min Syste  SCUB      Module Found               

      12/14 14:55:28 Min Syste  Sl12      Module Found               

      12/14 14:55:28 Min Syste  Sl11      Module Found               

      12/14 14:55:28 Min Syste  Sl10      Module Found               

      12/14 14:55:28 Min Syste  Sl 9      Module Found              

      12/14 14:55:28 Min Syste  Sl 8      Module Found              

      12/14 14:55:28 Min Syste  Sl 7      Module Found              

      12/14 14:55:28 Min Syste  Sl 6      Module Found              

      12/14 14:55:28 Min Syste  Sl 5      Module Found              

      12/14 14:55:28 Min Syste  Sl 4      Module Found              

      12/14 14:55:28 Min Syste  Sl 3      Module Found              

      12/14 14:55:28 Min Syste  Sl 2      Module Found              

      12/14 14:55:28 Min Syste  Sl 1      Module Found              

       

      Any assistance would be appreciated!