7 Replies Latest reply on Feb 10, 2014 2:21 AM by ashish

    How to connect Adtran 1335 switch to Netgear (model: gs748tps) switch so that we can connect my phones to Adtran switch 1335 also.

    ashish New Member

      Hi,

      I need your help. Currently I have Netgear L2 switch (model: gs748tps) and configured two vlan in this switch. One for data (i.e. Laptop, desktop and server) and second for Voice (Polycom IP Phone) . so both the network data and voice working fine. 

      Network and VLAN details information are given below.

      Network information: Data device we can use 10.1.255.xyz/24 IP range and Voice Device we can use 10.2.200.xyz/24 IP range.

      DHCP Server: we are using two DHCP server  for data and voice and configured on different servers.

      VLAN :  we have configured two VLAN. Default vlan (VLAN ID : 1) and  Voice VLAN (VLAN ID 2).  Now we have set all port except data and voice dhcp server , all port of default  Untagged member of Default vlan and Tagged member of Voice vlan. DHCP server of voice network port is member of only for  voice vlan and set PVID  2. DHCP server of Data network port is member  of only for data vlan and set the PVID 1.

      With the help of above configuration. We can do the following.

      1. If I have connected phone to any port of Netgear switch , Phone will take the IP  address from  Phone DHCP server (ex: 10.1.200.xyx/24) and phone will work. And if I have connected the laptop to same port Laptop taking the IP address from data DHCP server (ex: 10.1.255.xyx/24)

      My Actual requirement is.

      Recently we have purchased new Adtran switch 1335 and connected to Netgear switch. If I have connected the data device (Laptop) to Adtran Netvanta switch 1335 is taking the IP address from data DHCP server and it is working fine and communicates with Data devices. But if I have connected phone to Netvanta 1335 switch , phone device not taking the IP address from Voice DHCP server and It will not work.

      How to connect Adtran 1335 switch to Netgear (model: gs748tps) switch so that we can connect my phones to Adtran switch 1335 also.

       

      Ashish

        • Re: How to connect Adtran 1335 switch to Netgear (model: gs748tps) switch so that we can connect my phones to Adtran switch 1335 also.
          Employee

          ashish - Thanks for posting your question on the forum!

           

          Could you post your 1335 configuration to this thread so we can verify the settings? Please remember to remove any sensitive information. Also, please let us know which port is the uplink to the Netgear and which port you are using to test with.

           

          By default, all switchports are access ports for VLAN 1 on the 1335. If you plan on plugging just a phone into that switchport (with no PC plugged into the phone's data port) then you will want to assign that switchport to be an access port for the voice vlan. Also, you will want to make sure that the uplink between the 1335 and Netgear is set up as a trunk so that all VLANs are allowed to go between both switches.

           

          Please do not hesitate to let us know if you have any questions.

           

          Thanks,

          Noor

            • Re: How to connect Adtran 1335 switch to Netgear (model: gs748tps) switch so that we can connect my phones to Adtran switch 1335 also.
              ashish New Member

              Hi Noor,

              I have test some below configuration but I have not get the success.

              I have used Port 38 as a uplink port of netgear switch. This port is Untagged and member of data VLAN (Data VLAN  ID:1) and also the member of Voice VLAN (VLAN ID: 2)and set as a Tagged. This port 38 connected to Adtran 1335 switch port 21. Adtran 1335 port set as a trunk port. Then I have set another port 22 of Adtran 1335 switch set as a trunk port and connected my IP Phone to port 22 of Netvanta 1335 switch. But IP Phone not getting the IP address (10.1.200.xyx/24). but on same port if I connect Laptop, Laptop getting the data network IP address (10.1.255.xyx/24).

              Port 38 of Netgear switch PVID set 1.

              Note: Just for your information in polycom IP phone setup we have set VLAN ID 2 manually.

              Adtran 1335 current configuration are given below.

               

              !

              !

              ! ADTRAN, Inc. OS version R10.8.0.E

              ! Boot ROM version 15.01.B1

              ! Platform: NetVanta 1335 PoE, part number 1700525E2

              ! Serial number LBADTN1304AG087

              !

              !

              hostname "Switch"

              enable password password

              !

              clock timezone -11

              clock no-auto-correct-DST

              !

              ip subnet-zero

              ip classless

              ip default-gateway 10.1.255.1

              no ip routing

              !

              !

              !

              !

              no ip route-cache express

              !

              no auto-config

              !

              event-history on

              no logging forwarding

              no logging email

              !

              no service password-encryption

              !

              username "admin" password "password"

              !

              banner motd #

                               ****** Important ******

               

              Enable and Telnet passwords are configured to "password".

               

              Please change them immediately.

               

              The vlan 1 interface is enabled with an address of 10.10.10.1

               

              Telnet access is also enabled.

               

               

               

              #

              !

              !

              no ip firewall alg msn

              no ip firewall alg mszone

              no ip firewall alg h323

              !

              !

              !

              !

              !

              !

              !

              !

              dot11ap access-point-control

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              vlan 1

                name "Default"

              !

              !

              interface switchport 0/1

                no shutdown

              !

              interface switchport 0/2

                no shutdown

              !

              interface switchport 0/3

                no shutdown

              !

              interface switchport 0/4

                no shutdown

              !

              interface switchport 0/5

                no shutdown

              !

              interface switchport 0/6

                no shutdown

              !

              interface switchport 0/7

                no shutdown

              !

              interface switchport 0/8

                no shutdown

              !

              interface switchport 0/9

                no shutdown

              !

              interface switchport 0/10

                no shutdown

              !

              interface switchport 0/11

                no shutdown

              !

              interface switchport 0/12

                no shutdown

              !

              interface switchport 0/13

                no shutdown

              !

              interface switchport 0/14

                no shutdown

              !

              interface switchport 0/15

                no shutdown

              !

              interface switchport 0/16

                no shutdown

              !

              interface switchport 0/17

                no shutdown

              !

              interface switchport 0/18

                no shutdown

              !

              interface switchport 0/19

                no shutdown

              !

              interface switchport 0/20

                no shutdown

              !

              interface switchport 0/21

                no shutdown

              !

              interface switchport 0/22

                no shutdown

              !

              interface switchport 0/23

                no shutdown

              !

              interface switchport 0/24

                no shutdown

              !

              !

              interface gigabit-switchport 0/1

                no shutdown

              !

              interface gigabit-switchport 0/2

                no shutdown

              !

              !

              !

              interface vlan 1

                ip address  10.1.255.253  255.255.255.0

                no ip route-cache express

                no shutdown

              !

              !

              interface dot11ap 1 ap-type nv16x

                access-point mac-address 00:19:92:11:DA:A0

                name GRI-AP160-001

                location GRIOffice

              !

              !

              interface dot11ap 1/1 radio-type 802.11bg

                no shutdown

              !

              !

              interface dot11ap 1/1.1

                description Wiz_802.11BG_VAP

                ssid broadcast-mode "AdtranAP-01"

                security mode wpa aes-ccmp psk peppermint1!

                no shutdown

              !

              !

              interface dot11ap 1/2 radio-type 802.11a

                no shutdown

              !

              !

              interface dot11ap 1/2.1

                description Wiz_802.11A_VAP

                ssid broadcast-mode "AdtranAP-01"

                security mode wpa aes-ccmp psk peppermint1!

                no shutdown

              !

              !

              interface dot11ap 2 ap-type nv16x

                access-point mac-address 00:19:92:11:DF:E0

                name GRI-AP160-002

                location GRIOffice

              !

              !

              interface dot11ap 2/1 radio-type 802.11bg

                no shutdown

              !

              !

              interface dot11ap 2/1.1

                description Wiz_802.11BG_VAP

                ssid broadcast-mode "AdtranAP-02"

                security mode wpa aes-ccmp psk peppermint1!

                no shutdown

              !

              !

              interface dot11ap 2/2 radio-type 802.11a

                no shutdown

              !

              !

              interface dot11ap 2/2.1

                description Wiz_802.11A_VAP

                ssid broadcast-mode "AdtranAP-01"

                security mode wpa aes-ccmp psk peppermint1!

                no shutdown

              !

              !

              !

              !

              !

              !

              !

              !

              !

              no tftp server

              no tftp server overwrite

              http server

              no http secure-server

              no snmp agent

              no ip ftp server

              ip ftp server default-filesystem flash

              no ip scp server

              no ip sntp server

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              sip udp 5060

              sip tcp 5060

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              line con 0

                no login

              !

              line telnet 0 4

                login

                password password

                no shutdown

              line ssh 0 4

                login local-userlist

                no shutdown

              !

              !

              !

              !

              !

              !

              !

              end

              Let me know if I missout any configuration from my end.

               

              Thanks

              Ashish