4 Replies Latest reply on Feb 3, 2014 1:44 PM by calimochoman

    How to setup WAN/LAN Netvanta 3448

    calimochoman New Member

      Hi,

       

      I'm new to the Netvanta 3448.  I'm still trying to figure out how to setup one of the eth int as WAN and the other as LAN.  Here part of my config....

       

      interface eth 0/1

        ip address  172.211.1.200  255.255.255.0

        no rtp quality-monitoring

        no awcp

        no shutdown

        no lldp send-and-receive

      !

      !

      interface eth 0/2

        ip address  172.210.1.100  255.255.255.0

        no awcp

        no shutdown

        no lldp send-and-receive

       

      sh ip route

      Codes: C - connected, S - static, R - RIP, O - OSPF, B - BGP

             E1 - OSPF external type 1, E2 - OSPF external type 2

             IA - OSPF inter area

       

      Gateway of last resort is 172.211.1.10 eth 0/1

       

      S    0.0.0.0/0 [1/1/0] via 172.211.1.10, eth 0/1

      C    172.210.1.0/24 is directly connected, eth 0/2

      C    172.211.1.0/24 is directly connected, eth 0/1

       

       

      I want eth 0/1 to be the WAN and eth 0/2 to be the LAN.

       

      Any help?

       

      Thanks