2 Replies Latest reply on Feb 24, 2014 1:25 PM by ss_daveh

    PRI D Channel Down

    ss_daveh New Member

      On a 908e I have the following:

       

      interface t1 0/3

        description pri

        snmp trap threshold-reached

        snmp trap line-status

        tdm-group 1 timeslots 1-24 speed 64

        no shutdown

      !

      interface t1 0/4

        description pri

        snmp trap threshold-reached

        snmp trap line-status

        tdm-group 1 timeslots 1-24 speed 64

        no shutdown

      !

      !

      interface pri 1

        description PRI 1

        isdn name-delivery setup

        connect t1 0/3 tdm-group 1

        role network b-channel-restarts enable

        no shutdown

      !

      interface pri 2

        description PRI 2

        isdn name-delivery setup

        connect t1 0/4 tdm-group 1

        role network b-channel-restarts enable

        no shutdown

       

      I have plugged in the crossover cables to the Shortel system and the interfaces show UP with no alarms. When I run a debug on isdn it keeps repeating that both PRI's D-Channel is down.

       

      Is this just a bad crossover cable, because I'm pretty certain my interface config is correct?