2 Replies Latest reply on Jul 8, 2014 12:44 PM by noor

    spanning-tree guard root

    davide New Member

      Is there any CISCO alike (config)spanning-tree guard root  command ?

      thanks, Dave

        • Re: spanning-tree guard root
          Employee

          davide - Thanks for posting your question on the forum!

           

          Unfortunately, we do not have a command that performs the same function as the one you mentioned above. The only way we have to select the root in a switched network is to set the spanning-tree priority to 0.

           

          Let us know if you have any further questions.

           

          Thanks,

          Noor

            • Re: spanning-tree guard root
              Employee

              davide -

              I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post to unmark it and select another in its place with the applicable buttons.  If you have any additional information on this that others may benefit from, please come back to this post to provide an update.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

               

              Thanks,

              Noor