3 Replies Latest reply on Jul 30, 2014 10:24 AM by matt

    Error creating the output file to target drive.

    crawc New Member

      We have a few different unit that we get this error when trying to save the running config to startup config. The only way to temporarily fix this is to reboot the unit. It only is happening on the NV7100 systems, we have no problems with any Total Access units. Anyone else ever see this or know how to resolve it from happening?

       

      Error creating the output file to target drive.

        • Re: Error creating the output file to target drive.
          Employee

          Try copying the startup-config to a test file on the CFLASH:

           

          copy startup-config cflash test-config

           

          If that works then try again to copy the running-config to the startup-config.

           

          Thanks,

          Matt

            • Re: Error creating the output file to target drive.
              crawc New Member

              After copying the startup to cflash I'm able to copy running to both startup and tftp. How do I fix this permanently?

               

               

              Here is the output before and after:

               

              NV7100#copy running-config startup-config

              Building configuration...

              %Primary config: Error creating the output file to target drive.

              Secondary config file not defined.

              Dynamic config: Error creating the output file to target drive.

               

               

              NV7100#copy running-config tftp

              Address of remote host?216.201.8.5

              Destination filename?Superior_Wholesale_Distributors-NetVanta_7100

              Error creating the output file to target drive.

               

               

              NV7100#copy startup-config cflash test-config

              Percent Complete 100%

               

               

              NV7100#copy running-config startup-config

              Building configuration...

              Done. Success!

               

               

              NV7100#copy running-config tftp

              Address of remote host?172.16.1.1

              Destination filename?Backup_7-28-2014-NetVanta_7100

              Initiating TFTP transfer...

              Sent 45252 bytes in 6 secs. (7.365 KB/sec)

              Transfer complete.