Thanks for posting your question in the Support Community. Here's an example configuration with DHCP address reservations:
ip dhcp database local
ip dhcp excluded-address 192.168.0.1 192.168.0.99
ip dhcp excluded-address 192.168.0.200 192.168.0.254
ip dhcp pool "LAN"
network 192.168.0.0 255.255.255.0
dns-server 192.168.0.13 192.168.0.14
ip dhcp pool "Mike-MacBook"
host 192.168.0.100 255.255.255.0
hardware-address a1:b2:c3:d4:e5:01 ethernet
ip dhcp pool "Henry-iMac"
host 192.168.0.101 255.255.255.0
hardware-address a1:b2:c3:d4:e5:02 ethernet
I believe reservations must be within non-excluded ranges. Check out the application note Configuring DHCP in AOS for more, including CLI and GUI examples!
Edited to correct syntax (dhcp not dhcp-server)
Worked perfect as a concept.
Not sure if its just firmware related but the CLI commands were slightly different:
'ip dhcp pool' instead of ip dhcp-server pool'
But that was a quick find and update.
Thanks for the help cj
Good catch--thank you. I lifted that example from an old config and the command was changed in a more recent version of AOS. Just edited the example in case others wish to use the example after finding the article in the future.