1 Reply Latest reply on Feb 11, 2015 12:12 PM by noor

    Resolution to 3448 loop with output:

    mobrien New Member

      Router (1200821E1)

      Executing bootstrap...

      ram: 134217728 bytes of RAM detected.

      Serial Number: LBADTN1001AN143

      Bootstrap version: 13.03.00.SB, checksum: 70C3, Fri Nov 10 08:04:44 2006

      Core: source\Kernel\Private\Arch\PowerPC-e500\ExceptionHandlers.cpp#206: AdFatal(DMMU: Dadr=0x00000000, Iadr=0x400BD544: No permission to read.  StackTrc:  40001828 400019C0 400BD544 400BDBB0 4000D8E0 400671D8 40009A18 4000D9B8 4000ECBC 400041A8 40004174 ....Regs: r0=0x400bdbb0 r1=0x40828e90 r2=0x400ec380 r3=0x00000000 r4=0x400e27ac r5=0x02021200 r6=0x00008000 r7=0x32433a41 r8=0x00433a41 r9=0x00000065 r10=0x40874670 r11=0x40828ea0 r12=0x00000000 r13=0x40808000 r14=0x00000007 r15=0x00000009 r16=0x0000000b r17=0x0000000d r18=0x0000000f r19=0x00000011 r20=0x00000013 r21=0x00000015 r22=0x00000017 r23=0x00000019 r24=0x0000001b r25=0x0000001d r26=0x0000001f r27=0x400e0000 r28=0x40855d10 r29=0x00000000 r30=0x4082aed0 r31=0x400bd544.).0=0x40805b04 r31=0x4000cbb0.)....o......*/`...-..p....-.......-..6....-.....S.-.......m.**....%.......-..*......*t....=...n...}...**_./.&8....!..*&....$.xf.......+.Q.-...n*.*}.&|.h..-..5\J../..vf......0..P*....&.P.m.......-.......,../n*.*/.......-..*d(.*...nN2.....4O.......j.Q*%.*.*"X.,

      vfs: NONVOL: 248 tracks, 128 sectors/track, 1024 bytes/sector.

      eth0/1: initializing...

      eth0/1: MAC address is 00:A0:C8:51:2C:A9

      Fatal Assertion Failed!!!

        source\Kernel\Private\Arch\PowerPC-e500\ExceptionHandlers.cpp: 206

        DMMU: Dadr=0x00000000, Iadr=0x400BD544: No permission to read

        StackTrc:  40001828 400019C0 400BD544 400BDBB0 4000D8E0 400671D8 40009A18 4000D9B8 4000ECBC 400041A8 40004174 ...

      Regs: r0=0x400bdbb0 r1=0x40828e90 r2=0x400ec380 r3=0x00000000 r4=0x400e27ac r5=0x02021200 r6=0x00008000 r7=0x32433a41 r8=0x00433a41 r9=0x00000065 r10=0x40874670 r11=0x40828ea0 r12=0x00000000 r13=0x40808000 r14=0x00000007 r15=0x00000009 r16=0x0000000b r17=0x0000000d r18=0x0000000f r19=0x00000011 r20=0x00000013 r21=0x00000015 r22=0x00000017 r23=0x00000019 r24=0x0000001b r25=0x0000001d r26=0x0000001f r27=0x400e0000 r28=0x40855d10 r29=0x00000000 r30=0x4082aed0 r31=0x400bd54, can't seem to

       

       

       


      Constantly loops can't seem to break the loop to explore potential resolutions.

       

      Any suggestions?

        • Re: Resolution to 3448 loop with output:
          Employee

          Michael,

           

          Are you able to bring the device into bootstrap mode? To do this you will need a console connection to the router and hit the ESC button as the router is booting. If you are able to get into bootstrap mode, I would recommend upgrading your firmware to the latest maintenance release available. At this time, it is R10.9.5. Instructions on how to do this can be found on page 26 of the following guide: Upgrading Firmware in AOS

           

          If this does not resolve the issue, I would recommend contacting Adtran Technical Support. You can contact them in the following ways:

           

          - Open a web ticket by clicking on this link: https://www.adtran.com/openacase

          - Open a ticket by emailing support@adtran.com

          - Open a ticket by phone by calling 1-888-423-8726


          Please do not hesitate to let us know if you have any questions.


          Thanks,

          Noor