cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

Adtran 3120 Voip & QoS

Hello,

I recently purchased an Adtran NetVanta 3120 for our office. We have about 10 workstations and we use VoIP phones  from RingCentral. This router is a bit advanced and I am not sure if I set the QoS rules correctly. Can anyone give me some guidance? RingCentral recommends port triggering but I don't even know how to do that on the Adtran. Is the 3120 pretty much voip ready?

Tags (3)
0 Kudos
1 Reply
Anonymous
Not applicable

Re: Adtran 3120 Voip & QoS

poolet08‌:

Thank you for asking this question in the support community forum.  The NV3120 is VoIP/QoS ready and capable, but it will need to be configured.  Here is a post that explains how to setup the unit depending if there are VoIP phones or a PBX behind the ADTRAN:  NetVanta Series and Telephony (IP PBX or SIP Phones).  Also, here is the Configuring QoS in AOS guide, which explains how to use the QoS wizard.  However, if you have additional questions or information, please do not hesitate to reply to this post.  I will be happy to help in any way I can.

Levi