1 Reply Latest reply on May 19, 2015 8:17 AM by tee1up

    How to get dial tone on quad cards?

    adtran24844 New Member

      Need assistance on programming quad cpots cards. Can only get dial tone on the first two ports of each card.

        • Re: How to get dial tone on quad cards?
          tee1up Employee


          Check the status screen of the CPOTS card and make sure all 4 ports are provisioned the same. Check wiring of the shelf. If it's a 23" chassis it will use seperate amphenol connections for each port. The amphenol connection labeled T/R is for port 1, T1/R1 is port 2, E/SG is port 3 and M/SB is port 4. All 4 amphenol connections will need to be wired out.