2 Replies Latest reply on Sep 15, 2015 8:01 AM by nooksr

    Seeing Errored seconds and Controlled Slip seconds TA-908

    nooksr New Member

      The version that I am seeing the subject scenario is OS version R10.9.4.E.

       

      2015.09.15 12:41:58 PPP.NEGOTIATION LCP up

      2015.09.15 12:41:58 PPP.ERRORS Multilink is not enabled at the ppp destination

      2015.09.15 12:41:58 PPP.NEGOTIATION LCP down

      2015.09.15 12:42:08 PPP.NEGOTIATION LCP up

      2015.09.15 12:42:08 PPP.ERRORS Multilink is not enabled at the ppp destination

      2015.09.15 12:42:08 PPP.NEGOTIATION LCP down

      2015.09.15 12:42:18 PPP.NEGOTIATION LCP up

      2015.09.15 12:42:18 PPP.ERRORS Multilink is not enabled at the ppp destination

      2015.09.15 12:42:18 PPP.NEGOTIATION LCP down

      2015.09.15 12:42:24 T1.t1 0/3 CSS 24 hr threshold exceeded

      2015.09.15 12:42:28 PPP.NEGOTIATION LCP up

      2015.09.15 12:42:28 PPP.ERRORS Multilink is not enabled at the ppp destination

      2015.09.15 12:42:28 PPP.NEGOTIATION LCP down

      2015.09.15 12:42:38 PPP.NEGOTIATION LCP up

      2015.09.15 12:42:38 PPP.ERRORS Multilink is not enabled at the ppp destination

      2015.09.15 12:42:38 PPP.NEGOTIATION LCP down

      2015.09.15 12:42:48 PPP.NEGOTIATION LCP up

      2015.09.15 12:42:48 PPP.ERRORS Multilink is not enabled at the ppp destination

      2015.09.15 12:42:48 PPP.NEGOTIATION LCP down

      2015.09.15 12:42:58 PPP.NEGOTIATION LCP up

      2015.09.15 12:42:58 PPP.ERRORS Multilink is not enabled at the ppp destination

      2015.09.15 12:42:58 PPP.NEGOTIATION LCP down

      2015.09.15 12:43:07 PPP.NEGOTIATION LCP up

      2015.09.15 12:43:07 PPP.ERRORS Multilink is not enabled at the ppp destination

      2015.09.15 12:43:07 PPP.NEGOTIATION LCP down

      2015.09.15 12:43:17 PPP.NEGOTIATION LCP up

      2015.09.15 12:43:17 PPP.ERRORS Multilink is not enabled at the ppp destination

      2015.09.15 12:43:17 PPP.NEGOTIATION LCP down

       

      Current Performance Statistics:

          60 Errored Seconds, 0 Bursty Errored Seconds

          0 Severely Errored Seconds, 0 Severely Errored Frame Seconds

          0 Unavailable Seconds, 0 Path Code Violations

          0 Line Code Violations, 60 Controlled Slip Seconds

          0 Line Errored Seconds, 0 Degraded Minutes

       

      Ultimately this is preventing the TA-908 from syncing up with my Cisco7613.   I have tried almost every response from the community boards and none of them have worked so far.  I do not have a PBX with the router, and timing sources were both implemented within the router.  The web GUI was disabled before the router was shipped out to the customer.  Please advise your best advice.

       

      Thanks,

       

      Robert Nooks

      Data Implementation

      614-973-6383