Cant seem to wrap my head around this one but I'm new to Adtran... 
I have an IPSEC tunnel to another site:
==========================================================================================================
interface eth 0/1
ip address 74.xx.xx.226 255.255.255.240
ip access-policy Public
crypto map VPN
no shutdown
crypto ike policy 100
initiate main
respond main
local-id address 74.xx.xx.226
peer 216.xx.xx.xx
attribute 1
encryption 3des
authentication pre-share
group 2
!
crypto ike remote-id address 216.xx.xx.xx preshared-key 1234567890 ike-policy 100 crypto map VPN 10 no-mode-config no-xauth
=============================================================================================================
Tunnel works fine.
Question 1:
There is a VPN server on the inside that they want for people on the road. It's a MAC server. They are asking to forward the same ports I know IKE/IPSEC uses.
Couldn't I just ignore that there is an existing tunnel and add a secondary IP address on the eth 0/1 interface and do the port forwarding as usual on the secondary IP? Any detail would help.
Question 2:
Will that "crypto map VPN" on the physical interface mess with the secondary IP address on that interface?
Kind of confused.
Thank you!
-Curt
