1 Reply Latest reply on Dec 30, 2015 7:38 AM by d3ntr1k1n

    BGP statements in R10.9.6

    d3ntr1k1n New Member

      Hello,

       

      A 4430 router running AOS 18.02.04.00.E failed, and I'm replacing it with a 4430 running R10.9.6.

       

      This is the BGP statement in the original config (redacted some network info).

      !
      router bgp 65xxx
      no auto-summary
      no synchronization
      network 10.x.x.x mask 255.x.x.0
      neighbor 172.x.x.x
         no default-originate
         soft-reconfiguration inbound
         remote-as 65000
      !

       

      I used the same config on the previous router for the new router. Loaded it through the GUI with no changes. This is what the running config shows for BGP after:

      !
      router bgp 65xxx
      neighbor 172.x.x.x
         remote-as 65000
         shutdown
         exit
      !

       

      I saw other posts to the effect that AOS deprecated some BGP commands, etc.

      Does this second section perform the same functionality? Some of the lines deleted in 'sh output-errors' don't seem important, others do though (the 'network' line for example...)

      Thanks for the help, the 4430 is not a model I use often.

        • Re: BGP statements in R10.9.6
          d3ntr1k1n New Member

          Answered in an Adtran support ticket, marking as resolved, thanks.

           

          It should read:

           

          router bgp 65xxx
             neighbor 172.x.x.x
               remote-as 65000
              no shutdown

               exit

             address-family ipv4

               network 10.x.x.x mask 255.x.x.0

               neighbor 172.1.1.1

                 soft-reconfiguration inbound

                 no shutdown

                 exit

               exit