1 Reply Latest reply on Jan 15, 2016 7:55 AM by patrick

    600r bypass password

    c99hrisb New Member

      What is the procedure to bypass the password on the 600r, on boot up hitting ESC does nothing as well as the space bar?

       

      I am connected to the craft port and get a login prompt for password.

       

      Thanks

      Chris

        • Re: 600r bypass password
          patrick Employee

          Thank you for using the ADTRAN Support Community Forums.

           

          The TA600r is not an AOS product, so the "bypass password" procedure does not work on it. To get into bootstrap, you can hold down the "b" key while powering it up. This will allow you to upgrade the FW but little else. If you want to factory default the unit, you can hold down the "f" key on boot-up.

           

          At the LOGIN prompt, have you tried just hitting <ENTER>, or using "password"?

           

          If you do not want to factory default the unit, there is a challenge/response procedure you can go through to restore the default password (which is "password"). You will have to call ADTRAN Support (888-423-8726) to go through the challenge/response procedure.

           

          Thank you,

          Patrick