2 Replies Latest reply on Jun 29, 2016 8:29 AM by mgoldey

    Why can't I enable UDP relay on Port 11430?

    mgoldey New Member

      Folks:

       

      Can anyone think of a reason I would be preventing from establishing a UDP relay for port 11430 in particular?  The AOS Command Reference Guide says that any port can be specified, and this guide gives an example of a high port:   DHCP Relay and UDP-relay in AOS 

       

      I've had no problem creating a relay on port 9999 or 22222.  But I can't get my unit to accept port 11430 or any of the ports near it, using either the CLI or the web interface: 

       

      fw(config)#ip forward-protocol udp 11429

      % ERROR Port Not added

      fw(config)#ip forward-protocol udp 11430

      % ERROR Port Not added

      fw(config)#ip forward-protocol udp 11431

      % ERROR Port Not added

      fw(config)#ip forward-protocol udp 11432

      % ERROR Port Not added

      fw(config)#ip forward-protocol udp 11433

      % ERROR Port Not added

       

      The web interface simply says: 

       

      Error: Could not add UDP Forward Protocol.

       

      I don't think that there's anything in the running config that involves those ports:

       

      fw#show running-config | include 1143

      fw#

       

      The unit just refuses to do, you know, the one thing I want it to.  Anyone have an inkling why?  Thanks.

       

      I'm running Firmware R11.10.1.E