3 Replies Latest reply on Mar 7, 2016 9:45 AM by jay

    Adtran 908e VLAN Access Port

    multipl3x New Member



      We have run into a situation where I need to trunk VLANS to an Adtran 908e with a VLAN for SIP and then one for DATA


      The data VLAN I would like to pass out eth0/2 as an access port in that VLAN to another router.


      I cannot seem to figure out how to do this.


      I have tried creating eth0/2.1000 with vlan-id 1000 native, but it does not seem to work. Is this possible with the Adtran 908e?

        • Re: Adtran 908e VLAN Access Port
          jay Employee

          Evan, the 908e does support VLANs, but with some caveats. First, if I'm understanding correctly, you want to be able to pass a VLAN from one ethernet port to another. That is not possible. Each ethernet port on the 908 can be enabled for 802.1Q encapsulation with multiple VLAN subinterfaces. Each of those interfaces must be on its own unique IP network and those networks can not overlap with any network configured on the other ethernet port. The 908 will route between VLANs, but it can not bridge the 2 ethernet ports. Thanks



          1 of 1 people found this helpful