cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
davide
New Contributor

NETVANTA 1550-48P-POE

Jump to solution

I have 2 Netvanta 1550-48P  - PoE   switches connected by a 10 GB optical fiber connection.

The keep on getting irresponsive and I cannot ping their SVI interfaces and I cannot login with a serial connection either.

The only thing I can do is just powering them off. Never had this issue with an Adtran device before.

0 Kudos
1 Solution

Accepted Solutions
sf70165
New Contributor II

Re: NETVANTA 1550-48P-POE

Jump to solution

I am having a similar problem - a reboot seems to make it responsive for a while, like a day or 2, but then same problem occurs.

Have you had any luck figuring out a solution? I am just now looking at firmware options to see if an update may help.

View solution in original post

0 Kudos
8 Replies
sf70165
New Contributor II

Re: NETVANTA 1550-48P-POE

Jump to solution

I am having a similar problem - a reboot seems to make it responsive for a while, like a day or 2, but then same problem occurs.

Have you had any luck figuring out a solution? I am just now looking at firmware options to see if an update may help.

0 Kudos
jayh
Honored Contributor
Honored Contributor

Re: NETVANTA 1550-48P-POE

Jump to solution

What firmware are you running on the device?

sf70165
New Contributor II

Re: NETVANTA 1550-48P-POE

Jump to solution

I can’t get into the devices right now without powercycling them, which I can’t do now.

However I have a third that I can get into, and I am guessing they are all the same.

They are showing firmware version BVS1.0

Scott Feagan

Systems Administrator

Chemtech Plastics Inc.

Office: 224-276-2044

Cell: 224-306-4070

sfeagan@chemtechplastics.com<mailto:sfeagan@chemtechplastics.com>

Re: NETVANTA 1550-48P-POE

Jump to solution

Was there a solution to this?  I am having the same problem with the same model switch.

sf70165
New Contributor II

Re: NETVANTA 1550-48P-POE

Jump to solution

Adtran support sent me this, which worked

Hi Scott,

This sounds like an issue that is in the unsupported BVS1.0 firmware. If you have already upgraded the firmware to R11.10.2 and are still seeing this issue, please provide the configuration file for the switch that are connected.

Also in R11.10.0 there was an issue where the SFP's would not restore service after a power cycle, but this is resolved in R11.10.2.

Regards,

John Roadman

CCNA, CWNA, CWDP, ATSP\IN

ADTRAN Technical Support Engineer

davide
New Contributor

Re: NETVANTA 1550-48P-POE

Jump to solution

Boot ROM version BVS1.0

davide
New Contributor

Re: NETVANTA 1550-48P-POE

Jump to solution

Boot ROM version BVS1.0

davide
New Contributor

Re: NETVANTA 1550-48P-POE

Jump to solution

Replacing the BVS1.0 version with the NV1550A-R11-10-2 version fixed the issue