1 Reply Latest reply on Aug 2, 2016 12:01 PM by markfreeman

    what causes throttles on ethernet port of TA908e 2nd Gen?

    dennispennell New Member

      eth 0/1 is UP, line protocol is UP

        Description: 10M WAN

        Hardware address is 00:A0:C8:9D:E6:8E

        Ip address is x.x.x.x, netmask is 255.255.255.252

        IP MTU is 1500 bytes

        BW is 100000 Kbit

        100Mb/s, negotiated full-duplex, configured full-duplex

        ARP type: ARPA; ARP timeout is 20 minutes

        Last clearing of "show interface" counters: never

        30 second input rate 1692768 bits/sec, 175 packets/sec

        30 second output rate 149840 bits/sec, 159 packets/sec

          Queueing method

              Configured Queueing Method: fifo

              Effective  Queueing Method: weighted fair

          Output queue: 0/99/684/64/360 (size/highest/max total/threshold/drops)

            Conversations  0/23/256 (active/max active/max total)

            Available Bandwidth 7000 kilobits/sec

          Interface Shaper: 10000/62500/62500 (rate/budget/max budget)

            1250 bytes added to budget every 1 ms

            packet stats: 38243090/0/360/36240 (packets sent/waiting/dropped/delayed)

          33701320 packets input, 2423058805 bytes

          33701320 unicasts, 0 broadcasts, 0 multicasts input

          0 unknown protocol, 0 symbol errors, 0 discards

          0 input errors, 0 runts, 0 giants

          0 no buffer, 0 overruns, 0 internal receive errors

          0 alignment errors, 0 crc errors

          38243450 packets output, 3143641119 bytes

          38225056 unicasts, 922 broadcasts, 17472 multicasts output

          0 output errors, 0 deferred, 0 discards

          0 single, 0 multiple, 0 late collisions

          0 excessive collisions, 0 underruns

          0 internal transmit errors, 0 carrier sense errors

          0 resets, 51 throttles

       

      This is after 6 days of uptime on the TA908e.