1 Reply Latest reply on Nov 10, 2016 4:25 PM by jayh

    Caller ID Restricted

    egc New Member

      We have a fractional T1 on all lines but 1 the Caller ID on the outbound calls show RESTRICTED, we have to remove it,

       

      the phone provider says that the setting is in the Channel Bank and they receive it as restricted.

      (they sent me the following log:

      OPTIONAL PART Calling party number parameter 00001010 Parameter name 10 Calling party number 00000111 Length indicator 7 $07 0------- Odd even indicator 0 even -0000011 Nature of address indicator 3 unique national (significant) number 0------- Spare 0 - -001---- Numbering plan indicator 1 ISDN (Telephony) numbering plan (Recommendation E.164) ----01-- Address presentation restricted indicator 1 presentation restricted)

       

      The PBX provider that set it up initially is no longer around, we recently setup a new PBX and the provider says that they are not restricting it.

       

      I'm posting here our NetVantan 3200 Router config can anyone point me to what setting needs to be changed to remove the restriction:

       

      !

      !

      hostname "xxxx"

      enable password password

      !

      !

      ip subnet-zero

      ip classless

      ip routing

      !

      event-history on

      no logging forwarding

      no logging email

      logging email priority-level info

      !

      username "admin" password "password"

      !

      banner motd #

                       ****** Important ******

       

       

      Enable and Telnet passwords are configured to "password".

      Please change them immediately.

       

       

      The ethernet 0/1 interface is enabled with an address of 10.10.10.1

      Telnet access is also enabled.

       

       

       

       

       

       

      #

      !

      ip policy-timeout tcp telnet 14400

      !

      no ip firewall alg h323

      ip firewall alg sip

      !

      !

      !

      !

      !

      !

      !

      !

      !

      interface eth 0/1

        ip address  x.x.x.x  255.255.255.240

        no shutdown

      !

      !

      !

      interface t1 1/1

        tdm-group 1 timeslots 13-24 speed 64

        no shutdown

      !

      interface t1 1/2

        line-length 0

        no shutdown

      !

      interface ppp 1

        ip address  xx.xx.xx.xx  255.255.255.252

        no shutdown

        cross-connect 1 t1 1/1 1 ppp 1

      !

      !

      !

      !

      !

      !

      ip route 0.0.0.0 0.0.0.0 xx.xx.xx.xx

      !

      no ip tftp server

      ip http server

      ip http secure-server

      no ip snmp agent

      no ip ftp agent

      !

      !

      !

      !

      !

      !

      !

      line con 0

        no login

      !

      line telnet 0 4

        login

        password password

      !

      !

      end

       

       

       

      TIA

        • Re: Caller ID Restricted
          jayh Hall_of_Fame

          Nothing in that configuration terminates any voice services. As that unit isn't involved with SIP, you might want to turn off its ALG. "no ip firewall alg sip" should do the trick.

           

          On what device do the voice services terminate? It looks like a PRI from the debug you got from your carrier.

           

          You probably want to change your passwords, disable telnet, enable SSH, and put an access-list on the ssh lines.