8 Replies Latest reply on Dec 9, 2016 7:47 AM by bodleyca

    Configuring non T1 wan

    bodleyca New Member

      I'm sure this has been asked and answered many times but I could not find anything in a quick search.

       

      I've inherited a simple network that had a T1, connected to the WAN-T1 port on the back of a NetVanta 1224R switch, and a single device in port 1 of the switch that controls a billboard. (all configuration changes done on a laptop I connected to port 17 if it matters) The company cancelled the T1 and got a fiber connection instead, but did not look at the other devices to see what changes would be needed. They just called me when the billboard lost connectivity.

       

      I tried to just switch the cat5 running to the back of the unit to the new fiber switch instead of the t1 smartjack. However when I went into the configuration page to reconfigure it that port seems to be "T1 1/1" and only supports T1 settings, (limited speed and such)

       

      I then tried to reconfigure port 24 to be the 'default' VLAN and configuring it's static IP to be the one provided for the fiber connection, but I could not ping the gateway IP. (I could ping the static IP I configured on that port.)

       

      My question is, which is the better solution. Is there a way to force the "Wan-T1" port on the back to be standard ethernet? Is there a way to make port 24 the "WAN" port and route traffic through that? I'm ok with either solution, but currently can't get either to work. Is it possible or do I need a new switch/router instead?

       

      Any help would be appreciated.

        • Re: Configuring non T1 wan
          mtharris Employee

          Charles this topic is covered in this thread VLan & Routing and here is a link to the config guide Configuring InterVLAN Routing in AOS - Quick Configuration Guide

          • Re: Configuring non T1 wan
            michael56 New Member

            Sorry, but you cannot reconfigure a T1 port to be an Ethernet port. Despite the fact they are both RJ45 plug connections,  T1 (if that's a plugin card in your switch) hardware operates on different physical and electrical principles and protocols. You would need to configure a vlan interface first and apply an IP address to the interface. Then you would need to build a port as an access port and allow that vlan on that port. IE - switchport access vlan 100. That physical switchport now becomes your wan connection to the world.

            • Re: Configuring non T1 wan
              bodleyca New Member

              I removed the t1 card once I learned it could not be used for ethernet.

               

              The netvanta router automatically made port 1 the internet port so I made that the devault vlan and configured the ip on it. I put the cord to the billboard on port 2 and my laptop on 16.

               

              I can now ping both the ip on the netvanta and the gateway, however I cannot reach the internet.

               

              ! blanked out a couple secure passwords but otherwise here is the current config.

               

              !

              !

              ! ADTRAN, Inc. OS version 13.02.00

              ! Boot ROM version 06.03.00

              ! Platform: NetVanta 1224R, part number 1200510L1

              ! Serial number LBADTN0446AA603

               

              ! Flash: 16777216 bytes  DRAM: 33554431 bytes

              ! Date/Time: Thu Dec 08 2016, 14:20:18 EST

              !

              !

              hostname "Switch"

              enable password password

              !

              clock timezone -5-Eastern-Time

              !

              ip subnet-zero

              ip classless

              ip domain-proxy

              ip host "connie-lenovo" 192.168.0.5

              ip domain-name "zoomtown.com"

              ip name-server 216.68.1.100 8.8.8.8

              ip routing

              !

              no auto-config

              !

              event-history on

              no logging forwarding

              no logging email

              logging email priority-level info

              !

              no service password-encryption

              !

              username "admin" password "password"

              username #############################

              !

              banner motd #

               

               

               

               

                               ****** Important ******

               

              Enable and Telnet passwords are configured to "password".

              Please change them immediately.

               

              The vlan 1 interface is enabled with an address of 10.10.10.1

              Telnet access is also enabled.

               

               

               

              #

              !

              !

              ip firewall

              no ip firewall alg msn

              no ip firewall alg h323

              !

              !

              !

              !

              !

              !

              !

              !

              !

              !

              ip dhcp-server pool "internal"

                network 192.168.0.0 255.255.255.0

                domain-name "zoomtown.com"

                dns-server 192.168.0.1

                netbios-node-type h-node

                default-router 192.168.0.1

              !

              !

              !

              vlan 1

                name "Default"

              vlan 100

                name "VLAN0100"

              !

              interface eth 0/1

                description External Interface to ISP

                speed 10

                spanning-tree edgeport

                no shutdown

              !

              interface eth 0/2

                spanning-tree edgeport

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/3

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/4

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/5

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/6

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/7

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/8

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/9

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/10

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/11

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/12

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/13

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/14

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/15

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/16

                spanning-tree edgeport

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/17

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/18

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/19

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/20

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/21

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/22

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/23

                no shutdown

                switchport access vlan 100

              !

              interface eth 0/24

                no shutdown

                switchport access vlan 100

              !

              !

              interface vlan 1

                ip address  216.196.180.106  255.255.255.252

                access-policy Public

                no shutdown

              interface vlan 100

                ip address  192.168.0.1  255.255.255.0

                access-policy Private

                no shutdown

              !

              !

              !

              router rip

                redistribute ospf

                redistribute static

                redistribute connected

                network 74.202.107.52 255.255.255.252

              !

              !

              !

              !

              !

              ip access-list standard wizard-ics

                remark Internet Connection Sharing

                permit any

              !

              !

              ip access-list extended self

                remark Traffic to NetVanta

                permit ip any  any    log

              !

              ip policy-class Private

                allow list self self

                nat source list wizard-ics interface vlan 1 overload

              !

              ip policy-class Public

                ! Implicit discard

               

              !

              !

              !

              ip route 66.162.112.68 255.255.255.252 74.202.107.53

              ip route 74.202.107.52 255.255.255.252 66.162.112.69

              ip route 74.202.107.52 255.255.255.252 66.162.112.70

              !

              no ip tftp server

              no ip tftp server overwrite

              ip http server

              no ip http secure-server

              ip http language English

              no ip snmp agent

              no ip ftp server

              no ip scp server

              ip sntp server

              !

              !

              !

              !

              !

              !

              !

              !

              line con 0

                login

              !

              line telnet 0 4

                login

                password ########

                no shutdown

              line ssh 0 4

                login local-userlist

                no shutdown

              !

              sntp server pool.ntp.org

              !

              !

              !

              !

              end

              • Re: Configuring non T1 wan
                bodleyca New Member

                Removed some old routing and rip entries. latest stripped down config I can still ping gateway but not further.

                 

                I put the external ip on laptop and tested the fiber connection. browsing works fine so not ISP isue.

                 

                !

                !

                ! ADTRAN, Inc. OS version 13.02.00

                ! Boot ROM version 06.03.00

                ! Platform: NetVanta 1224R, part number 1200510L1

                ! Serial number LBADTN0446AA603

                 

                ! Flash: 16777216 bytes  DRAM: 33554431 bytes

                ! Date/Time: Thu Dec 08 2016, 15:12:00 EST

                !

                !

                hostname "Switch"

                enable password password

                !

                clock timezone -5-Eastern-Time

                !

                ip subnet-zero

                ip classless

                ip domain-proxy

                ip host "connie-lenovo" 192.168.0.5

                ip domain-name "zoomtown.com"

                ip name-server 216.68.1.100 8.8.8.8

                ip routing

                !

                no auto-config

                !

                event-history on

                no logging forwarding

                no logging email

                logging email priority-level info

                !

                no service password-encryption

                !

                username "admin" password "password"

                username "##########################

                !

                banner motd #

                 

                 

                 

                 

                                 ****** Important ******

                 

                Enable and Telnet passwords are configured to "password".

                Please change them immediately.

                 

                The vlan 1 interface is enabled with an address of 10.10.10.1

                Telnet access is also enabled.

                 

                 

                 

                #

                !

                !

                ip firewall

                no ip firewall alg msn

                no ip firewall alg h323

                !

                !

                !

                !

                !

                !

                !

                !

                !

                !

                ip dhcp-server pool "internal"

                  network 192.168.0.0 255.255.255.0

                  domain-name "zoomtown.com"

                  dns-server 192.168.0.1

                  netbios-node-type h-node

                  default-router 192.168.0.1

                !

                !

                !

                vlan 1

                  name "Default"

                vlan 100

                  name "VLAN0100"

                !

                interface eth 0/1

                  description External Interface to ISP

                  speed 10

                  spanning-tree edgeport

                  no shutdown

                !

                interface eth 0/2

                  spanning-tree edgeport

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/3

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/4

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/5

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/6

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/7

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/8

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/9

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/10

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/11

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/12

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/13

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/14

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/15

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/16

                  spanning-tree edgeport

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/17

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/18

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/19

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/20

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/21

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/22

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/23

                  no shutdown

                  switchport access vlan 100

                !

                interface eth 0/24

                  no shutdown

                  switchport access vlan 100

                !

                !

                interface vlan 1

                  ip address  216.196.180.106  255.255.255.252

                  access-policy Public

                  no shutdown

                interface vlan 100

                  ip address  192.168.0.1  255.255.255.0

                  access-policy Private

                  no shutdown

                !

                !

                !

                router rip

                  redistribute ospf

                  redistribute static

                  redistribute connected

                !

                !

                !

                !

                !

                ip access-list standard wizard-ics

                  remark Internet Connection Sharing

                  permit any

                !

                !

                ip access-list extended self

                  remark Traffic to NetVanta

                  permit ip any  any    log

                !

                ip policy-class Private

                  allow list self self

                  nat source list wizard-ics interface vlan 1 overload

                !

                ip policy-class Public

                  ! Implicit discard

                 

                !

                !

                !

                no ip tftp server

                no ip tftp server overwrite

                ip http server

                no ip http secure-server

                ip http language English

                no ip snmp agent

                no ip ftp server

                no ip scp server

                ip sntp server

                !

                !

                !

                !

                !

                !

                !

                !

                line con 0

                  login

                !

                line telnet 0 4

                  login

                  password ##############

                  no shutdown

                line ssh 0 4

                  login local-userlist

                  no shutdown

                !

                sntp server pool.ntp.org

                !

                !

                !

                !

                end

                  • Re: Configuring non T1 wan
                    michael56 New Member

                    You still have not "allowed" your vlan (vlan 1) on the physical interface that is your WAN.Your config appears to be using vlan 1 to connect to your ISP, but you need to allow your physical port access to vlan 1. Edit eth 0/1 if its your WAN interface and aloow vlan 1 over it. Switchport access vlan 1

                      • Re: Configuring non T1 wan
                        bodleyca New Member

                        Doh, figured something simple. I'll be back onsite tomorrow morning and I'll give that a try. Thanks for all your help.

                        • Re: Configuring non T1 wan
                          bodleyca New Member
                          untitled.bmp

                          It appears to be allowed.

                           

                          editing the physical interface I do not see where to set vlans.

                           

                          untitled2.bmp

                            • Re: Configuring non T1 wan
                              michael56 New Member

                              According to your GUI screenshots, vlan 1 is allowed. however I would have expected eth 0/1 to look like this:

                              !

                              interface eth 0/1

                                description External Interface to ISP

                              spanning-tree edgeport

                                switchport access vlan 1

                                no shutdown

                              !

                              Unless you know for certain that your ISP provider is handing off to you a 10meg PHYSICAL 10BaseT interface, you're better off with setting your speed parameter to "AUTO" and not hardcoding it for 100Meg or 10Meg normally. The hardware 'speed' is not the same as the 'bandwidth' that you're paying for from your provider.