In the GUI go to Data > URL Filtering > URL Filters (at the way bottom)
So you just click Allowmode and Top web sites check boxes.
Then go to Excluded-Domain list and add your websites, then go to interface assignments tab and apply to your interfaces.
If that doesn’t work you might have to uncheck the allowmode box on basic setup tab.
Just test and see which works. Been a long time since I have used this.
Let me know if you have any questions.
Thanks Mark for the response. I got that HTTP can be blocked as you outlined above. But how can I block HTTPS?
I would of assumed that it would block https also. I assumed u tested with https?
I will test and see myself.
yeah, it appears that only HTTP can be blocked in the URL Filter.
Was wondering if this was fixed in a newer release. I am running (see below)
OR if I can block HTTPS sites another way?
ADTRAN, Inc. OS version R10.9.4.E
Mainline Version: ENM.13.100
P4 Changelist: 145319
Built on: Fri Jun 6 13:17:20 2014
Upgrade key: 3003f8fb230db45232cd3a406db26be4
Boot ROM version A2.06.B2.01
Built on: Fri Jan 20 11:09:57 2012
Copyright (c) 1999-2014, ADTRAN, Inc.
Platform: NetVanta 7100, part number 1200796E1
Serial number LBADTN1427AP586
Maximum number of users: 30
Flash: 33554432 bytes DRAM: 134217728 bytes
Yeah out content filter is basic if u want a full one you will need websense or something like that.
Is there another way I can accomplish this in the 7100?
host www.whatever.com 127.0.0.1