0 Replies Latest reply on Jan 17, 2017 1:14 AM by usb_port11

    Accounting on external RADIUS server

    usb_port11 New Member

      Hi.

       

       

      BSAP 1800 not send accounting information on RADIUS server.

      Authentication process run good.

       

       

      Configuration below.

       

       

      RADIUS Server

      192.168.4.1

      ADTRAN controller

      192.168.4.60

      ADTRAN BSAP

      192.168.4.61

       

       

      vlan4 - Managment (192.168.4.0/24)

      vlan2 - SSID Test (192.168.2.0/24)

       

       

      Configuration - Role Based Access Control - Locations

      [vlan2]:

      id 2

      cidr 192.168.2.0/24

       

       

      Configuration - Role Based Access Control - Roles

      [Test-role]

      vlan2

      allow any both any

       

       

      Configuration - External Authentication - Servers

      [Radius_auth]:

      Accounting server: Radius_acc

      ip: 192.168.4.1

      port: 1812

      Secret: ******

      Authentication: Test-role

       

       

      Configuration - External Authentication - Accounting

      [Radius_acc]:

      Enable: true

      ip: 192.168.4.1

      port: 1813

      Secret: ******

       

       

      Configuration - Wireless - SSIDs

      [Test]:

      Authentication: WPA2

      Cipher: AES-CCM

      RADIUS: Radius_auth

       

       

      Configuration - Wireless - AP Templates

      [default]:

      2.4 Ghz

      SSIDs Test

       

       

      interfaces:

      ADTRAN controller

          ge-0/0/5 {

              unit 0 {

                  family ethernet-switching {

                      port-mode trunk;

                      vlan {

                          members [ vlan2 ];

                      }

                      native-vlan-id 4;

                  }

              }

          }

      ADTRAN BSAP

          ge-0/0/7 {

              unit 0 {

                  family ethernet-switching {

                      port-mode trunk;

                      vlan {

                          members [ vlan2 ];

                      }

                      native-vlan-id 4;

                  }

              }

          }

      RADIUS

        ge-0/0/8 {

              unit 0 {

                  family ethernet-switching {

                      port-mode trunk;

                      vlan {

                          members [ vlan2, vlan4, vlanLAN ];

                      }

                  }

              }

          }

       

       

      For testing i am set mirroring on ports and filter udp ports 1812 and 1813 (wireshark).

      1812 exist, 1813 not exist at all.

       

       

      Please help.