4 Replies Latest reply on Feb 10, 2017 9:10 AM by smiclean

    Best practice to splitting data and internet on Adtran 908e

    smiclean New Member

      Adtran 908e. 

       

      Ethernet port 1 has out side IP for internet.

      Ethernet port 2 has inside IP of 10.10.0.3.

       

      How would I go about configuring the gig port so that data  stays on internal network and internet goes out the e1 port?

       

      Thanks.

        • Re: Best practice to splitting data and internet on Adtran 908e
          jayh Hall_of_Fame

          The post is somewhat confusing as the Internet is used to transmit and receive data. A more complete definition of what you are trying to do would be helpful.

           

          You would configure your firewall for NAT to go from your eth 0/2 to a public IP, usually that of your eth 0/1 interface. The GUI firewall wizard can do this for you.

           

          Are there other internal networks to which you need to connect?