2 Replies Latest reply on Feb 9, 2017 4:13 PM by jayh

    1550-48 SFP module inserted is not supported

    rusted-knight New Member

      I have a Netvanta 1550-48. I have sfp+ optics that I try in the switch and I get the following error: SFP module inserted is not supported. I know cisco has a command that allows for unsupported optics to be used. Does Adtran have such a command?

        • Re: 1550-48 SFP module inserted is not supported
          eric.carlson Employee

          There is no workaround for 10Gb SFPs the i know of, but 1Gb SFPs by others should work, just not supported.

          • Re: 1550-48 SFP module inserted is not supported
            jayh Hall_of_Fame

            This is not uncommon. It's a racket. Optics for all of the major network equipment manufacturers are made by a company named Finisar, regardless of the brand name on the transceiver.

             

            There's a 256-byte EEPROM code block that is customized for each "manufacturer" (Finisar customer) as well as the sticker with the brand name. Other than that they're all identical inside.

             

            Companies like Adtran, HP, and Cisco apply huge markups on "genuine" Finisar transceivers. Insanely huge markups.

             

            For Adtran, try "no alarm enable pluggable unknown" in interface configuration mode, but beware that it doesn't work on all platforms. Cisco is "service unsupported-transceiver" in global mode. HP is "allow-unsupported-transceiver" in global mode.

             

            If that doesn't work, buy from a Finisar reseller that can re-flash the EPROM to mimic Adtran's code, or bite the bullet and shell out the big bucks for a "genuine" transceiver.

             

            You'll hear dire warnings from the network gear manufacturers about non-genuine transceivers causing pestilence, plague, famine, volcanoes, etc. Ignore them. You can buy a Finisar transceiver from a reseller coded for Adtran, Cisco, etc. and half a dozen spares for about the same money as one "genuine" one. Once the EEPROM is dialed in the only difference is the sticker (and the price).