5 Replies Latest reply on Feb 23, 2017 9:51 AM by tomlmma

    Disable multilink ppp when T1 down

    calvine New Member

      How can I disable routing over a multilink ppp interface when one of the t1 links is down?

       

      This would be a simple matter with a track on the route, but "test if interface" does not support t1.

       

      The application is a TA908e with MLPPP over T1 for voice and backup WAN on eth 0/1. I want to avoid using the MLPPP interface when one of the member links is down, since it may not have sufficient bandwidth for the expected number of calls.

        • Re: Disable multilink ppp when T1 down
          jayh Hall_of_Fame

          Adtran has no configuration for the minimum number of links in an MLPPP bundle. Curiously, you can specify a maximum.

           

          What's on the other end of the multilink PPP? If it's a Cisco, you can specify ppp multilink links minimum <number> on the Cisco side of the multilink interface. If a T-1 fails the line protocol will go down which will cause the TA908e to withdraw the route. 

          • Re: Disable multilink ppp when T1 down
            calvine New Member

            Unfortunately, the TotalAccess 900e series is not one of the products open for submitting feature requests directly, and I don't have direct address to an Adtran sales representative.

             

            Submitting a Feature Request

              • Re: Disable multilink ppp when T1 down
                tomlmma New Member

                I will be out of the office and returning Friday February 24th. Please

                call 207-326-2240 if you have an issue that needs immediate attention.

                 

                Thomas Lamontanaro

                Network Support Specialist

                207-326-2514

                Maine Maritime Academy

                 

                 

                *     *     *     *     *     *     *     *     *     *     *     *     *     *     *

                This message, including any attachments, contains confidential information

                intended for a specific individual

                and purpose, and is protected by law. If you are not the intended

                recipient, please contact the sender

                immediately by reply e-mail and destroy all copies.  You are hereby

                notified that any disclosure, copying, or

                distribution of this message, or the taking of any action based on it, by

                anyone other than the intended

                recipient, is strictly prohibited.