2 Replies Latest reply on Mar 6, 2017 7:57 PM by dgilbert

    when I try to add a pri 1-23+24 I get error: resource unavailable

    dgilbert New Member

      Netvanta 7100

      11.10.6.E

      t1 is normal settings

      when I try to add a pri 1-23+24 I get error: resource unavailable

        • Re: when I try to add a pri 1-23+24 I get error: resource unavailable
          jayh Hall_of_Fame

          Not sure what you mean by normal settings. First, you need to specify a tdm-group under the T1 interface.

           

          For example:

           

          interface t1 0/1

            description PRI physical interface

            tdm-group 1 timeslots 1-24 speed 64

            no shutdown

           

          Then bind the PRI interface to it.

           

          interface pri 1

            description PRI logical interface

            connect t1 0/1 tdm-group 1

            no shutdown

           

          Under the PRI interface you configure:

           

            isdn switch-type

            isdn name-delivery

            digits-transferred

            role (network or user)

          and any other PRI parameters as needed.

           

          Next create an isdn-group and bind it to the PRI.

           

          isdn-group 1

            connect pri 1

           

          Then create a voice trunk and bind it to the isdn group.

           

          voice trunk T01 type isdn

            description "ISDN-PRI"

            resource-selection linear ascending

            connect isdn-group 1

           

          Then a voice grouped-trunk with the dial patterns that should route out the PRI.

           

          voice grouped-trunk PRI-TG

            description PRI trunk group

            trunk T01

             accept....

           

          And from there it's turtles all the way down.