0 Replies Latest reply on Mar 7, 2017 8:31 AM by argonzalez

    How to Radius Windows Server 8 R2?

    argonzalez New Member

      Hi, i want to configure port auth for wired computers in my network:

       

      Windows Server R2 64BIT

      Roles:

      1 - Active Directory Certificate Services

      2 - Active Directory Domain Services

      3 - DNS server

      4 - Network Policy and Acces Services

       

      Switch NetVanta 1534P

      Firmware: R11.2.0.HA

       

      aaa on

      !

      radius-server enable-username

      !

      radius-server host 192.168.3.29 timeout 5 retransmit 10 key

      !

      aaa authentication login LoginUseTacacs group tacacs+

      aaa authentication login LoginUseRadius group radius

      aaa authentication login LoginUseLocalUsers local

      aaa authentication login LoginUseLinePass line

      !

      aaa authentication enable default enable

      !

      aaa authentication port-auth default group radius

      !

      !

      Port configuration:

      interface gigabit-switchport 0/5

        spanning-tree edgeport

        no shutdown

        switchport access vlan 15

        switchport trunk native vlan 15

        switchport voice vlan 99

        port-auth port-control auto

      !

       

      Windows Server Error:

      Reason Code: 48

      Reason: The connection request did not match any configured network policy.

       

      Windows Client Pc Error:

      EventID: 15514

      ErrorCode: 0x40420110

      ReasonCode: 0x50005

       

      documentation for this configuration:

      1 - Configuring 802.1X in AOS.pdf

      2 - Configuring Port Access Control in AOS.pdf

       

      Where is my error?