Hi Just wondering if someone can help me i am trying to configure 802.1x authentication and its not working. We are using Netvanta 1648p and 1500's
Here is example config that is not working. There is a lot of cisco configuration examples but nothing for adtran.
interface gigabit-switchport 0/2
switchport access vlan 10
switchport voice vlan 200
qos trust cos
port-auth auth-mode voice-based mac-auth-bypass
port-auth port-control auto
Here is normal setup without port authentication.
interface gigabit-switchport 0/1
switchport mode trunk
switchport trunk native vlan 10
Retrieving data ...