1 Reply Latest reply on Jun 9, 2017 6:43 PM by jayh

    Adtran 908 responding with 403 for Invite.

    rajneesh.ramakrishnan New Member

      Hi,

       

      I am using Adtran as a gateway to our PBX. When I am making any calls from PBX, Adtran 908e is not forwarding the Invite to the far end. I am getting 403 from Adtran. Looks like I am making mistake in Permission templates.

      Can any one please help me here..   Thanks in advance.

        • Re: Adtran 908 responding with 403 for Invite.
          jayh Hall_of_Fame

          One possibility is that your inside access policy is blocking access to the TA908 itself.

           

          You have:

           

          ip policy-class inside

            nat source list web-acl-4 interface eth 0/2 overload policy outside

            allow list web-acl-3

           

          Try changing this to:

           

          ip policy-class inside

            allow list web-acl-3 self

            nat source list web-acl-4 interface eth 0/2 overload policy outside

           

          Where you first permit all traffic to the unit itself, then do the NAT.