1 Reply Latest reply on Jun 30, 2017 2:29 PM by briangonyer

    Temperature controllers work when hard wired but not when on wireless network

    username1 New Member

      These temp controllers work when hard wired but not when connected to the wireless which is supplied via 3 blue socket APs. The wireless and wired are in the same subnet, the temp controllers communicate via UDP on port 47808 (BACnet). When looking at the wireshark BACnet filter, the two devices constantly broadcast for other devices but a reply is not met. Attached is screenshot of a capture when the temp controllers are hard wired. Any ideas as far as changes that could be made to either the BlueSocket controller or NetVanta3140? The BlueSocket template being used looks to be close to default settings, the only thing I noticed in configuring the SSID is that "convert multicast to unicast" is disabled.