0 Replies Latest reply on Jul 28, 2017 3:29 PM by mhccphoneguy

    Syslog Issues with TA900 GEN2

    mhccphoneguy New Member

      We have several TA900 Gen2 units now running R12.4.0.E and I cannot get them to send over both the FACILITY and LEVEL information in the syslog packets. We are using Kiwi syslog and every event that comes in from the Adtran only shows the default FACILITY (Syslog) and LEVEL (Info) in the Kiwi syslog table. For additional testing I also configured my Cisco 2960x switch to send syslog messages to the Kiwi server and its packets do include both the FACILITY and LEVEL in the packet (see below).

       

      Here is my current TA900 config for logging:

      logging forwarding on

      logging facility local7

      logging forwarding priority-level info

      logging forwarding receiver-ip 172.x.x.x

       

       

      Question:

      How can I get the TA900 to send out syslog messages with both the FACILITY and LEVEL information?

       

       

      Adtran Wireshark

      adtan wireshark.png

       

       

      Cisco Wireshark

      cisco wireshark.png

       

      Kiwi Logs

      kiwi cisco vs adtran.png

       

       

       

      Thanks,

      Blake