0 Replies Latest reply on Oct 11, 2017 11:05 PM by tgovsx

    Logging ACL on NV4660

    tgovsx New Member



      I have created an acces-list configured to an interface with an "log"-Entry.
      I'm connected to the NV4660 by Telnet and want to see the matches at telnet session.
      But it does not work.


      Access-list ist configured correctly (match entries)

      Event-Logginig is on

      Event Prio configured tested with debugging, info, warning an notice

      Loggging console ist on


      Configuration example


      conf t

      ip access-list extended Out-Traffic
      permit tcp host x.x.x.x host x.x.x.x eq 443 log

      permit ip any any


      int gigabit-ethernet 0/2.1

      ip access-group Out-Traffic out



      Router#sh ip access-lists Out-Traffic

      Extended IP access list Out-Traffic

         permit tcp host x.x.x.x  host x.x.x.x eq https  log (24 matches)

         permit ip any  any     (794385 matches)



      I want to see this 24 hits displayed on the monitor like a "terminal monitor".
      What do I have to do


      Thank you