1 Reply Latest reply on Nov 13, 2017 11:40 AM by grump

    BSAP version 3.0.1.HB has been released (KRACK vulnerability fix and other issues)

    evanh Employee

      BSAP Version 3.0.1.HB has been released and posted for the  BSAP 1900s, BSAP 2000s and BSAP 3000 series. Please review the BSAP Version 3.0.1.HB Release Notes (19XX, 2XXX, and 3XXX Series) for specific details. This version should only be used with vWLAN 3.0.1. If you do not have version 3.0.1 loaded, please upgrade your vWLAN first.


      For information on upgrading your  APs, please see Upgrading BlueSocket vWLAN Controllers and Access Points. Note that upgrades from version 2.3 and below are no longer supported.


      Important Note: vWLAN can only be upgraded to 3.0.1 or above if it is currently on version 2.6.2. vWLANs on versions 2.4 to 2.6.1 must first upgrade to version 2.6.2 and then upgrade to version 3.0.1. AP firmware does not have to be upgraded to 2.6.2 and can instead be upgraded directly to 23.0.1 with the final upgrade.


      If you attempt to upgrade from a version prior to 2.6.2 to 2.8.0 or above, the upgrade will error out and the following message will appear in the upgrade alerts and platform alerts:


      *** MUST BE RUNNING 2.6.2 TO UPGRADE TO THIS IMAGE! *** (Please upgrade to 2.6.2 prior to loading this image.)


      Follow these links to the vWLAN and BSAP software downloads.


      Software Downloads
      BSAP 1800v2/1840
      BSAP 1920/1925

      BSAP 1930/1935/1940

      BSAP 2020
      BSAP 2030/2035/2135
      BSAP 3040/3045