2 Replies Latest reply on Apr 20, 2018 3:00 PM by yredovich

    Cant connect my adtran 908e to my opensips soft switch

    mtr New Member

      i gave spend many hours to try yo figure this out

       

      i have an opensips server that i use to sell SIP TRUNK right now i have some Asterisk, freeswitch, Cisco ATA devices that are connected to this switch. i got a customer that has a panasonic PBX with a T1 interface so i went ahead and bought the 908e 2nd generation i spend many hour configuring it i couldnt get it to work it was sending the wrong info so i was not able to Auth the outbound calls

       

      finally i got it to register and right now i am getting server 501 on my opensips this is the error from my logfile

       

      /usr/sbin/opensips[24112]: ERROR:core:parse_sip_msg_uri: bad uri <sip:3476783993@68.68.120.146:5060:5060>

       

      so i went ahead and removed all the 5060 that i saw in the web gui and i am still seeing the error line with the 5060 twice

       

       

      this device is sitting on the local network behind a router

       

      this is my config file

       

       

       

      !

      !

      hostname "TA908e"

      enable password xxxxxxxx

      !

      !

      clock timezone -5-Eastern-Time

      !

      ip subnet-zero

      ip classless

      ip default-gateway 192.168.2.1

      ip routing

      ipv6 unicast-routing

      !

      !

      name-server 8.8.8.8 192.168.2.249

      !

      !

      no auto-config

      !

      event-history on

      no logging forwarding

      no logging email

      !

      no service password-encryption

      !

       

      username "admin" password "xxxxxxxxx"

      !

      !

      no ip firewall alg msn

      no ip firewall alg mszone

      no ip firewall alg h323

      !

      !

      !

      !

      !

      !

      !

      !

      no dot11ap access-point-control

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      interface eth 0/1

        ip address  192.168.2.60  255.255.255.0

        no awcp

        no shutdown

        media-gateway ip primary

      !

      !

      interface eth 0/2

        no ip address

        no awcp

        no shutdown

      !

      !

      !

      !

      interface t1 0/1

        description PRI to PBX 2

        tdm-group 2 timeslots 1-24 speed 64

        no shutdown

      !

      interface t1 0/2

        no shutdown

      !

      interface t1 0/3

        no shutdown

      !

      interface t1 0/4

        tdm-group 1 timeslots 1-24 speed 64

        no shutdown

      !

      !

      interface pri 1

        description pri 1

        isdn name-delivery setup

        connect t1 0/4 tdm-group 1

        no shutdown

      !

      !

      interface fxs 0/1

        no shutdown

      !

      interface fxs 0/2

        no shutdown

      !

      interface fxs 0/3

        no shutdown

      !

      interface fxs 0/4

        no shutdown

      !

      interface fxs 0/5

        no shutdown

      !

      interface fxs 0/6

        no shutdown

      !

      interface fxs 0/7

        no shutdown

      !

      interface fxs 0/8

        no shutdown

      !

      !

      interface fxo 0/0

        no shutdown

      !

      !

      isdn-group 1

        connect pri 1

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      ssh-server 223

      no tftp server

      no tftp server overwrite

      http server 82

      http secure-server 445

      no snmp agent

      no ip ftp server

      no ip scp server

      no ip sntp server

      !

      !

      !

      !

      !

      !

      !

      !

      sip

      sip udp 5060

      no sip tcp

      !

      !

      !

      voice feature-mode network

      voice forward-mode network

      !

      !

      !

      !

      !

      !

      !

      !

      voice dial-plan 1 local NXX-XXX-XXXX

      voice dial-plan 2 long-distance 1-NXX-XXX-XXXX

      !

      !

      !

      !

      !

      !

      voice trunk T01 type sip

        Description "DPhone"

        sip-server primary sip.xxxxx.cloud

        domain "108.58.25.30"

        sip-keep-alive options 30

        codec-list Trunks both

        no diversion-supported

       

      voice trunk T02 type isdn

        resource-selection circular descending

        connect isdn-group 1

        no early-cut-through

        t38

        rtp delay-mode adaptive

      !

      !

      voice grouped-trunk PRI

        trunk T02

        accept $ cost 0

      !

      !

      voice grouped-trunk SIP

        trunk T01

        accept $ cost 0

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      !

      line con 0

        login

      !

      line telnet 0 4

        login

        no shutdown

      line ssh 0 4

        login local-userlist

        no shutdown

      !

      !

      !

      !

      !

      end

        • Re: Cant connect my adtran 908e to my opensips soft switch
          jwable Frequent Visitor

          Option 501 errors are not always error messages.  They are a keep alive message that keeps the ports open and registration established.  If you are seeing the messages but calls are woring normally the message can be ignored.  If calls are not working normally then we will need to see the output of debug sip stack messages and debug voice verbose from the Adtran during a call.  Also I see where you have the Domain command on the SIP Trunk but no Grammer Statements telling the how to use it, so if the Adtran is not able to register or make calls you may want to try adding the following to the config:

           

          ip sip grammar from host domain

          ip sip grammar to host domain

           

           

          If your Softswitch requires registration you have to add it to your trunk as well, if using IP based trust then the current config should be fine.  Add the following to your Voice Trunk T01 to add registration:

           

          registrar primary sip.xxxxx.cloud

          register UsernameHere auth-name "UsernameHere" password "PasswordHere"

          authentication username "UsernameHere" password "PasswordHere"

           

          John Wable

          • Re: Cant connect my adtran 908e to my opensips soft switch
            yredovich New Member

            I would do "debug sip stack messages" using the Adtran CLI and see if the URI sent from the Adtran does indeed list the port twice. Based on the config you provided - it shouldn't. Running the debug will help you determine which device to troubleshoot next:

             

            If you see the 5060 port listed twice in the debug, then I would try a different code version. I'm running R12.3.2.E on TA900eG2 and haven't had issues like this, so you may want to give it a shot.

             

            If the debug only shows the port once, then I would look at the soft switch config. There could be a header manipulation rule that adds the port, before the SIP parser goes to work.

             

            Hope this helps

            Yan.