cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
elwellm
New Contributor

Adtran show 0 for the firmware.

Jump to solution

Our original 904 power supply fried and now we have another Adtran, out of warranty of course, that has no firmware.

I tried to copy a downloaded version via putty and it fails to copy to the Adtran.

Firewall is turned off.

Tried this on a windows 10 and a windows 7 PC.

How can I restore the firmware?

0 Kudos
1 Solution

Accepted Solutions
elwellm
New Contributor

Re: Adtran show 0 for the firmware.

Jump to solution

Tech support help with this problem.

Downloaded a different TFTP transfer app and it worked just fine.

El Weatherhead

North Shore Technologies ( NSTech )

Office: 847.662.2100

Cell: 847.370.9925

View solution in original post

0 Kudos
3 Replies
Anonymous
Not applicable

Re: Adtran show 0 for the firmware.

Jump to solution

Hello,

Thanks for posting to the forum.  Can you get to the command line or are you in bootstrap?  Reply the part number from the unit that shows up in a show version.  Also, can you get me the output of show flash.  This info will help us figure out how to proceed.  You might need to upgrade from bootstrap.  Are you connected to the unit via serial connection now?

Thanks,

Geo

elwellm
New Contributor

Re: Adtran show 0 for the firmware.

Jump to solution

Tech support help with this problem.

Downloaded a different TFTP transfer app and it worked just fine.

El Weatherhead

North Shore Technologies ( NSTech )

Office: 847.662.2100

Cell: 847.370.9925

0 Kudos
Anonymous
Not applicable

Re: Adtran show 0 for the firmware.

Jump to solution

Glad to hear you have it working.

Geo