1 Reply Latest reply on Jun 28, 2018 11:33 AM by jwable

    Having more then 1 Realm

    tpearman New Member

      Is it possible to setup an adtran to regsiter FXS lines to two different carriers?  I see where I can do fail over to a secondary trunk, but I want to register to two different carriers all together. 

       

      On an innomedia I can setup different profiles and then associate the port to the profile.

       

      outbound proxy: carrierasbc.abc.com

      domain: abc.com

       

      outbound proxy: Carriberb.xyz.com

      domain: xyz.com

       

      Two different underlying domains, two different switches, two different sbcs, two different carriers all together.

       

      On the Adtran I see where I can setup sip-server primary and sip-server secondary, however their is only one realm and that is globally set on the Adtran.

        • Re: Having more then 1 Realm
          jwable Frequent Visitor

          Since you are setting different Domain you will need to create two SIP Trunks one for each provider following should get you going in the right direction.  Anywhere you NXX-NXX-XXXX substitute correct number for that carrier.  The Voice Grouped trunk is where you create allowed and rejected calls or set priority on trunk by setting a cost to make one trunk preferred over another for those calls.  In the example I made carrierA the preferred carrier for local outbound and carrier the preferred carrier for outbound toll free calls, both trunks block outbound 976 calls.  On the voice user I set CarrierA inbound number as the main user number and CarrierB inbound as a DID. 

           

          Voice Trunk T01 type SIP

          match dnis , replace ani NXX-NXX-XXXX

          !match line overrides outbound caller id to match that carriers outbound number

          Sip-server primary carrierasbc.abc.com

          Registrar primary carrierasbc.abc.com

          domain abc.com

          Register NXXNXXXXXX auth-name "name" password "pass"

          authentication username "name" password "pass"

           

          Voice Trunk T02 type SIP

          match dnis , replace ani NXX-NXX-XXXX

          !match line overrides outbound caller id to match that carriers outbound number

          Sip-server primary Carriberb.xyz.com

          Registrar primary Carriberb.xyz.com

          domain xyz.com

          Register NXXNXXXXXX auth-name "name" password "pass"

          authentication username "name" password "pass"

           

          Voice Grouped Trunk CarrierA

          trunk T01

          accept NXX-NXX-XXXX cost 10

          accept 1-8XX-NXX-XXXX cost 100

          reject 1-976-NXX-XXXX

          !This is where you set the trunk to accept or deny specific outbound calls

           

          Voice Grouped Trunk CarrierB

          trunk T02

          accept NXX-NXX-XXXX cost 100

          accept 1-8XX-NXX-XXXX cost 10

          reject 1-976-NXX-XXXX

          !This is where you set the trunk to accept or deny specific outbound calls by setting a higher cost it make the other trunk preffered

           

           

          Voice user NXXNXXXXXX

          !Number in voice user line is inbound number for main carrier

          connect fxs 0/1

          did NXXNXXXXXX

          !DID number is is number of carrier B for inbound calls

           

          John Wable